The Evolution of Dental Bonding Generation: A Clinical Guide
Dental bonding generations from 4th to 8th: steps, etching strategy and indications for each, with a representative adhesive per generation.

Each dental bonding generation reflects a change in steps and etching strategy: the 4th and 5th generations are etch-and-rinse, the 6th and 7th are self-etch, and universal adhesives, often called the 8th generation, can be used either way. Below is a representative adhesive for each generation, followed by how each one works and when to choose it, with more products in our guide to the best dental bonding agents.
Which Bonding Agent Fits Each Generation?
One adhesive per bonding generation, chosen among widely used systems, plus a dual-cure universal option. All of them are in our composites and restorative products category for side-by-side price comparison.
The Total-Etch Era: 4th and 5th Generations
4th Generation: The Three-Step Reference
The 4th generation introduced the three-step total etch, or etch-and-rinse, technique: phosphoric acid on enamel and dentin, a hydrophilic primer, then a separate hydrophobic adhesive. The primer and adhesive infiltrate the etched collagen network to form the hybrid layer.
- Performance: in a review of laboratory and clinical data on adhesion to enamel and dentin, conventional three-step etch-and-rinse adhesives performed most favorably and were the most reliable in the long term. OptiBond FL and Adper Scotchbond Multi-Purpose are the best-known examples.
- The caveat: they are technique-sensitive. Over-drying the etched dentin collapses the collagen and reduces infiltration, and the extra steps add chair time.
Three-Step Etch-and-Rinse, 4th Generation: 3M Adper Scotchbond Multi-Purpose
Adper Scotchbond Multi-Purpose is a three-step total etch system: phosphoric acid etchant, primer and a separate light-cure adhesive. It is the classic 4th generation format, with more steps than simplified systems in exchange for a separate hydrophilic primer and hydrophobic adhesive layer. Best for: Clinicians who want a three-step etch-and-rinse system for enamel-heavy and esthetic work.
5th Generation: Simplified Total-Etch
The 5th bonding generation combines primer and adhesive in one bottle, applied after a separate etch and rinse. It saves a step, but the combined solution is more hydrophilic and depends on solvent evaporation and correct dentin moisture, and simplified adhesives have generally performed below three-step systems in long-term studies
Two-Step Etch-and-Rinse, 5th Generation: 3M Adper Single Bond Plus
Adper Single Bond Plus is a light-activated total etch adhesive in a water and ethanol solvent, with a silica nanofiller, that combines primer and adhesive in one bottle. After etching and rinsing it is applied and light-cured, and it is also indicated for porcelain and composite repairs. Best for: Practices that want a two-step total etch adhesive for direct composite restorations
The Self-Etch Revolution: 6th and 7th Generations
6th Generation: Two-Step Self-Etch
The 6th generation removed the separate phosphoric acid step. An acidic primer etches and primes dentin at the same time without rinsing, followed by a hydrophobic bond. Clearfil SE Bond is the best-known example, and Clearfil SE Protect adds an antibacterial monomer to the primer.
- Clinical benefit: no rinse and no moist-bonding step, so results are more consistent from operator to operator. In the same review, mild two-step self-etch adhesives came close to three-step etch-and-rinse systems in bonding performance.
- Limitation: mild primers etch uncut enamel less effectively, so selective etching of the enamel margins with phosphoric acid is common.
Two-Step Self-Etch, 6th Generation: Kuraray Clearfil SE Protect
Clearfil SE Protect is a two-step self etch system: a primer with MDP and the antibacterial monomer MDPB, applied for 20 seconds, followed by a bond with MDP and surface-treated sodium fluoride. Kuraray also indicates it for the treatment of hypersensitivity and for intraoral repairs. Best for: Dentin-dominated cavities where a mild two-step self etch protocol is preferred
7th Generation: All-in-One Systems
The 7th bonding generation puts etching, priming and bonding in one bottle and one application. It is the fastest option, but one-step adhesives mix hydrophilic and hydrophobic components in a single layer, which makes the cured adhesive more prone to water uptake, and they are usually used with selective enamel etching. A classification review of dental adhesive systems traces how bonding moved from total etch in the 4th and 5th generations to self etch in the 6th, 7th and 8th.
One-Step Self-Etch, 7th Generation: GC G-aenial Bond
G-aenial Bond is a one-step, HEMA-free, light-cure self etch adhesive with a phosphoric acid ester monomer in an acetone solvent. The protocol is short: leave for 10 seconds, dry for 5 seconds with maximum air and light-cure for 10 seconds, and GC designed it for use with selective enamel etching. Best for: Quick direct restorations by clinicians who etch enamel margins selectively.
8th Generation and Universal Adhesives: The New Standard
Universal, or multi-mode, adhesives are often grouped as the 8th generation. They are single-bottle adhesives that can be used in self-etch, selective-etch or total-etch mode, so the clinician picks the etching strategy case by case.
Universal Light-Cure Adhesive, 8th Generation: Dentsply Sirona Prime&Bond active
Prime&Bond active is a universal adhesive with acidic monomers and Active-Guard technology, which balances hydrophilic and hydrophobic components for wet or dry dentin, in an isopropanol and water solvent. It works in etch-and-rinse, self etch or selective etch mode, is agitated for 20 seconds and light-cured, and pairs with dual-cure and self-cure materials through a self-cure activator. Best for: Practices that want one adhesive whose result depends less on how moist the dentin is.
The Power of 10-MDP
- Chemical bonding: 10-MDP forms an ionic bond with the calcium in hydroxyapatite, which adds chemical adhesion to micromechanical retention, especially in self-etch mode.
- Beyond the tooth: the same monomer bonds to zirconia and metal, which is why many universal adhesives are also indicated as primers for indirect restorations.
- Enamel: in self-etch mode the etch on uncut enamel is mild, so selective enamel etching is the usual protocol.
Generation Number or Bonding Strategy: Which Tells You More?
Generation numbers follow the order in which systems reached the market and are not used consistently by manufacturers. Researchers classify adhesives by strategy and number of steps instead: three-step and two-step etch-and-rinse, two-step and one-step self-etch, and universal adhesives that can follow either approach. When you compare products, the strategy and the number of steps tell you more than the bonding generation number.
Dual-Cure Universal Adhesive for Cores and Cements: VOCO Futurabond U
: Futurabond U is a dual-cure universal adhesive in SingleDose units that bonds light-cure, dual-cure and self-cure composites and cements without a separate activator. VOCO indicates it for metal, zirconia, alumina and silicate ceramic without extra primers, with a 20 second application, air-drying and a 10 second light cure Best for: Core build-ups, post cementation and indirect work where light cannot reach every surface.
Clinical Verdict: Choosing Your Strategy
Three-step etch-and-rinse systems remain the reference when enamel bonding and long-term durability come first. Mild two-step self-etch systems are the alternative for dentin-dominated cavities, with fewer technique variables. For most practices, a universal adhesive used with selective enamel etching is the daily workhorse: enamel gets a phosphoric acid etch, dentin is treated in self-etch mode, and one bottle covers direct and many indirect procedures.

Dental Bonding Generations: Frequently Asked Questions
What generation is a universal adhesive?
Universal adhesives are usually called the 8th generation. They are single-bottle adhesives that can be used in self-etch, selective-etch or total-etch mode, and most contain a phosphate monomer such as 10-MDP.
What is the difference between 4th and 5th generation bonding agents?
Both are etch-and-rinse. The 4th generation uses three steps, with separate primer and adhesive bottles, while the 5th generation combines primer and adhesive in one bottle, so it has two steps.
Which bonding generation is the strongest?
Three-step etch-and-rinse (4th generation) and mild two-step self-etch (6th generation) adhesives have the strongest long-term record in the research literature. One-step systems are faster but have generally been less durable.
Is a 7th generation bonding agent good for enamel?
It bonds less effectively to uncut enamel than phosphoric acid etching does. Selective etching of the enamel margins before applying a one-step self-etch adhesive is the usual way to improve the enamel bond.
Bonding Agents and Alara: Get the Best Deals from Trusted Suppliers
Whether your practice uses a three-step system or a universal adhesive, the same bottle is priced differently from one vendor to the next. Alara compares real-time offers on every adhesive in this guide, from Adper Single Bond Plus to Prime&Bond active, across 15+ verified vendors.
Ready to Start Saving on
Dental Supplies?
Join hundreds of dental practices already using ALARA to compare prices and streamline their supply ordering.
References
- Van Meerbeek B, De Munck J, Yoshida Y, Inoue S, Vargas M, Vijay P, Van Landuyt K, Lambrechts P, Vanherle G. Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges. Oper Dent. 2003;28(3):215-235. PMID: 12760693.
- Sofan E, Sofan A, Palaia G, Tenore G, Romeo U, Migliau G. Classification review of dental adhesive systems: from the IV generation to the universal type. Ann Stomatol (Roma). 2017;8(1):1-17. PMID: 28736601. DOI: 10.11138/ads/2017.8.1.001
More Articles

Clearfil SE Bond Review: Self-Etch Standard
A clinical review of Clearfil SE Bond by Kuraray: MDP chemistry, the two-step self-etch protocol, long-term bond evidence, and where it fits
July 10, 2026

Gluma Desensitizer Review: Kulzer's Chairside Sealer
A clinical review of Gluma Desensitizer, Kulzer's glutaraldehyde-HEMA solution: how it works, indications, the evidence, and where it fits in practice.
July 5, 2026

Dental Cement for Crowns: Which Material to Use and When
Which dental cement for crowns? Evidence-based guide to resin, glass ionomer and zinc phosphate cements for permanent crown cementation and procurement.
March 8, 2026